Type | Marks | Properties |
---|---|---|
Razor steel | TE-2 | With components adjusted and strictly control via production, the hardness level is highly increased. Plus the process of carbide micronizing, the material enjoys good cuttness and wearness. It is widely used for razor blades, length-edged tools, high-class edge tools, surgical blades and other industrial cutlery. |
ESR Steel | SK2ESR SK4ESR |
ESR steel is the special refining steel. Through the segregation and inclusion, content is improved remarkably. Surface and quality is also improved. It is used for camera’s shutter, thickness gauge and special appliance. |
Carbon tool steel | SK4 SK5 SK6 SK7 |
From its processing, hardness, material property and cost effect, carbon steel is widely used for cold rolled steel strip. The material is widely used in steady appliance like knife and cutting tool; flexible appliance like bury, spring, knit needle, horn, measure tape and washer. |
Alloy tool steel | SKS2 SKS7 SKS5 SKS51 |
SKS2 and SKS7 is the kind of steel which adds Tungsten and Chromium into high carbon steel so that the thinner and steady complex carbide can be scattered. Because of its technical resistance and superior high temperature resistance, it is widely used for cutter, hack saw, metal band saw. SKS5 and SKS51, with Nickel and chromium added, have high level of toughness. It is used for band saw, cutter and horn. |
Carbon steel | S70C S60C S55C S50C S45C S35C |
Comparing with carbon tool steel, its carbon quantity is lower and non-purity element is higher. It is suitable for the usage of strength and toughness material. For low carbon quantity, base material’s processing would be increased.
However, it is easily to have non-equality during quenching. Therefore, the temperature control and cooling method control is very important. It is widely used for office machine, electrical and machine’s parts, spring, washer, clutch parts, Thomson razor, bearing parts and so on. |
Type | Marks | Properties |
---|---|---|
Austenite Series | SUS 301 | SUS301 is the 17-7 stainless which contains less Chromium and Nickel than 18-8 stainless. Since its Austenite is not stabilized, the cold rolling will proceed the Martensite transformation and increase the strength. It’s widely used in Spring material. |
SUS 304 | Typical type of 18-8 stainless steel. | |
Martensite Series | SUS420J2 | Broad mechanical properties from quenching and tempering processing. |
RB-S | Widely used in Razor Blade material. Similar performance as Stainless material with cost effectiveness. |